The HT Lead Sensor comprises a sensor head with 3 metres of cable, and is a device designed to pick up ignition pulses from the HT lead of the ignition system without a direct connection to it, and convert the pulses to a level suitable to drive the SureShift 2 shift light (or other tachometer, datalogger etc).
The unit is mainly of use where it is not possible (or not desirable) to get a direct connection to the low voltage side of the coil (for example, where cutting into a wiring loom may otherwise be necessary).
It is also useful for CDI systems, and Magneto systems, which generally do not have a conventional 12V signal to the coil.
| Max. operating frequency: | 25000 pulses/min |
|---|---|
| Output signal: | 4.5 to 14.5V x 2.0ms duration square pulse |
| Power consumption: | <1mA |
| Power supply: | 5 to 15 Volts dc |
| Temperature: | -10 to +50oC (14 to 122oF) |
| Sensor Head:- | |
| Dielectric strength: | 110kV/cm (BS2782) |
| Size mm: | 16 x 16 x 61 (0.063" x 0.063" x 2.4") |
| Weight: | 25g (0.055 lbs) excluding cable |
| Protection: | BS4752 and IEC529 IP65 |
Integral cable is 3 metres in length.
[Contents]
Comments, email to webmaster@aceserve.co.uk
$Revision: 1.1 $ $Date: 2001/04/15 10:14:50 $
, Copyright © ACES Limited 1998, 1999, 2000, 2001